KEWELL MO / MG Meter units Pressure type quantitative measuring unit
Performance and characteristics and use: pressurized quantitative measuringparts, which belong to the direct pressure action type. The piston action of themetering part is driven by the pressure oil output by the lubrication pump, and thepiston is reset by the spring force when the oil pump stops working, that is, themetering is measured and stored for quantitative oil.The oil discharge isaccurate, and the metered parts are discharged only once in one oil supply cycleand far away in the lubrication system. Near. High, low, horizontal or verticalinstallation have no effect on the displacement of metering parts, forced oildischarge, sensitive action. Two seals are used to prevent the discharge of oilagent from flowing back.The measuring parts and the coupling are splitstructures, according to the oil demand of each lubrication point, thecorresponding measuring parts are arbitrarily selected, and the PV seriesconnectors can be used in free combination, and can be used in series andparallel.The diameter of the oil outlet of the metering part is p4, which needs tobe connected with GN-4 oil pipe joint and GB-4 duo-cone ferrule.
